不銹鋼軟管泵的保養：不銹鋼泵緊固端面螺栓時，不銹鋼泵用力要對稱均勻；邊緊邊盤動轉子。若遇到卡澀，不銹鋼泵應松掉螺栓重新緊。電泵泵驅動軸不能承受任何徑向垂直力，皮帶、鏈條、齒輪等側向驅動方式禁止使用。底板強的驅動軸與電機軸的連接采用彈性聯軸器或鏈?zhǔn)铰?lián)軸器。軟管泵的齒輪油度要夠，不要時間長了泵的底板一軟，造成電機與泵不對中而損壞泵。弄清楚泵的允許高轉速和現場工作高轉速。務必讓流體進到入口，盡量不要干轉和空轉。                 

軟管泵是由泵殼、轉子體、機座、軟管、減速電機以及電控系統等部分組成。轉子體旋轉，轉子體上的一對壓輥沿著一根特制的膠管旋轉，壓輥與泵殼產生的擠壓力將膠管壓扁，在管子自身彈性和側導輥的作用下，通過恢復原狀產生的真空吸入物料，物料從管內排出，這樣往復循環。 

The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.

 

軟管泵具有輸送強研磨性介質的能力。它無閥、無密封，同介質接觸的 部件是橡膠軟管的內腔，壓縮軟管的轉子完全獨立于介質之外。

The hose pump has the ability to transport strong abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner cavity of the rubber hose. The rotor of the compression hose is completely independent of the medium.